Modular house MG3
https://dreammobilhouse.pl/wp-content/uploads/domek-modulowy-model-mg-3-1.jpg
4.7
52
5
1
260145
PLN
InStock
Dom modułowy MG3 to nasza propozycja budynku o nowoczesnej architekturze, w modnej stylistyce domu stodoły. Domek modułowy MG3 składa się z czterech modułów, dostarczanych jako wykończone części budynku na działkę Inwestora i zestawianych razem w jedną całość.
71955
EUR
InStock
Modular house
MG3
The modular house model MG3 is our proposal for a building with modern architecture, in a fashionable "house-barn" style, consisting of four modules, delivered as finished parts of the building to the Investor's plot and put together into one whole. Parts of the building are made entirely in our production plant and brought to the construction site. The assembly of the house takes one day, and additional work extends the construction time to a maximum of three days.
The MG 3 house is available in 17 variants - in various external dimensions, surfaces and functional layouts. The basic variant of the house has a usable area of 38.5 m2 and an area measured along the floor (with slants) of 47.5 m2. The largest variant has a usable area of 71.8 m2 and a floor area of 87.3 m2. The external dimensions of the house start in the basic version from 6.6 x 5.1 m, up to 10.7 x 6.1 m in the largest variant. Each subsequent variant of the house is larger and more comfortable than the previous one. All variant versions of the house can be built both in the building permit procedure and in the house on application procedure. We offer the house in a year-round or holiday version. The all-year variant is energy-saving, very well insulated and equipped with installations that allow comfortable living in it all year round. The architectural style we used in this project is minimalist and modern. The external appearance of the house is based on a combination of a wooden façade with finishing elements made of steel sheet. Finishing materials and colors of the house can be freely changed, adapting it to the requirements and tastes of the customer. MG 3 has a compact rectangular body covered with a roof with an angle of inclination of 37 degrees, with a roof protruding above the terrace to protect against precipitation and excessive sunlight, and with a large glazed gable, opening the living room and bedrooms in the attic to the surrounding garden. The building can be freely expanded - after the base 4 modules have been assembled, if the need arises later, you can add more parts of the house - subsequent modules. Each house module is a separate structurally closed whole, which is why the house can be dismantled many times and moved to another place.
MG 3 modular house from the outside
The external façade of the MG 3 modular house is finished with natural wood cladding - made of painted, secured slats. As an option, the facade finish can be made as a mix of wood and seam sheet on the walls, or finish the walls with Vox Kerrafront or Vinylit panels. The roof of the building is covered with a seam sheet. The colors of the house can be freely modified - according to the customer's requirements.
The colors of the external façades can, for example, be: a mixed two-color wood and graphite, or completely dark - black. Depending on the selected version of the house, the size and arrangement of the windows can be changed - always with a characteristic large window from the living room to the terrace. The MG 3 modular house is made on a steel floor frame, which is an element of the module structure, with steel elements reinforcing the walls and ceilings of the building. The house modules are placed on concrete point foundations. Each of the modules is a compact, integrated whole, thanks to which the house can be easily transported and rearranged.
Interior of a modular MG 3 house
The interior of the basic variant of the MG 3 modular house consists of a living room, a kitchenette, a bathroom and a storage room on the ground floor, and three bedrooms in the attic. The functional and utility program ensures free use of the house by two to four people, using it as a year-round building or a summer house - according to the Investor's needs.
The MG 3 model, in addition to the base variant, has an additional 16 versions with increased external dimensions and usable space, and a more or less extensive functional program. The largest variants of the house have an additional room on the ground floor, a larger living room, and three bedrooms, a dressing room and a second bathroom in the attic. The interior of the house in each option is completely finished - with wall, floor and ceiling linings. Additionally, you can order a fully furnished house, with sanitary facilities and household appliances. The walls of the rooms are finished with natural wood cladding combined with Strama board inserts, or PVC cladding, or possibly with Fermacell boards (on request). The ceilings of the house are made of natural wood from slats, or alternatively of panels made of Strama boards. An additional decorative element of the ceiling of the ground floor, adding attractiveness to the interior, are the wooden beams of the ceiling protruding below the ceiling line. The walls in the bathroom can be finished - depending on the customer's choice: PVC panels, Kerradeco or Fibo - in combination with fragments of wood. The floors of the MG 3 modular house are finished with Lentex high-abrasion PVC vinyl flooring as a base, or alternatively with vinyl panels or layered boards. In the Premium version, the house is offered as fully furnished, with furniture made of laminated boards, wood-like texture or in a single color. Household appliances, sanitary utensils and upholstered furniture are elements that can be ordered in the house specification - depending on the selected equipment option.
A detailed description of the finish and additional equipment of our module houses - click here
Modular house MG3 virtual tour
Virtual tour around the house
►
Wirtualny spacer
Parameters of the modular house MG 3
The MG 3 modular house in the basic version has external dimensions of 6.6 x 5.1 m. Larger variant versions are also available (8 x 5 m, 9 x 5 m, 10.6 x 5 m, 6.6 x 5.5 m, 8 x 5.5m, 9 x 5.5m, 10.6 x 5.5m, 6.6 x 6m, 8 x 6m, 9 x 6m, 10.6 x 6m). Each of the versions has a different layout of the rooms, and the rooms themselves are larger. The structure of the building consists of a lower steel floor frame - painted or galvanized, with reinforcement of walls and ceilings made of steel structure, which gives rigidity to the module.
The rest of the structure - walls, roof, floors, ceilings - is made of a wooden frame made of C24 certified wood. The house was designed in accordance with the standards for frame construction, so that it meets the strength requirements. The additional steel structure is the core - the main skeleton of the building structure. Steel elements are hidden in structural layers and well thermally insulated to avoid thermal bridges in the building partitions. The walls, roof and floors are insulated: thermally, anti-moisture, windproof and vapor barrier - with mineral wool, foils and membranes. Partitions have been designed to ensure diffusion openness, tightness of external partitions and good vapor barrier. Regardless of whether we choose a year-round or summer house, thermal insulation has the same thickness: 20 cm in the walls, 25 cm in the roof, 20 cm in the floor. Finishing of individual surfaces: floors - construction boards and final flooring. Finishing the walls and ceilings from the inside - with natural wood cladding, Strama boards, plasterboards or Fermacell. Finishing of external walls - with natural wood cladding (facade board), or alternatively seam sheet, or possibly facade panels - e.g. Kerrafront or Vinylit. Roof finish - seam sheet. External window and door woodwork - 2- or 3-pane PVC windows. External doors - insulated steel. Interior doors - made of varnished board, e.g. Dre, or on request, of varnished waterproof board.
| External dimensions | 5,1 x 6,62 m |
| Building area | 32,57 m2 |
| Building area without arcades | 30,68 m2 |
| Total area | 45,35 m2 |
| Usable area | 38,48 m2 |
| Gross volume | 162 m3 |
| Net volume | 120 m3 |
| Number of people / beds | 4 |
| The height from the floor to the ridge | 6,13 m |
| Height to ridge with frame and floor | 6,35 m |
| Minimum height from pos. ground to the ridge with the foundation | 6,50 m |
| Room height | 2,6 (2,5) m |
| The height of the attic rooms | 2,67 m |
| Knee wall height | 1,06 m |
| The angle of the roof | 37 degrees |
| The weight of the house | 15 tons |
| House structure | Wood and steel |
| Minimum number of support points for a point foundation | 16 |
| Energy performance for year-round version | EP 69,6 kWh/(m2) |
Wall construction:
- Wall cladding.
- Vapor barrier foil.
- Alternatively, a pre-wall for the installation space.
- OSB.
- Thermal insulation made of mineral wool 20 cm.
- Szkielet konstrukcyjny drewniany podwójny 2x belki 95×45 mm.
- Structural steel frame made of closed profiles (if present).
- Windproof membrane.
- Wooden battens 5×5 cm.
- Ventilation space.
- External wall cladding.
Wall construction:
- Wall cladding.
- Vapor barrier foil.
- Alternatively, a pre-wall for the installation space.
- OSB.
- Thermal insulation made of mineral wool 20 cm.
- Double wooden structural frame, 2x beams 95×45 mm.
- Structural steel frame made of closed profiles (if present).
- Windproof membrane.
- Wooden battens 5×5 cm.
- Ventilation space.
- External wall cladding.
Floor construction:
- Floor finishing.
- MFP floor construction board 22 mm.
- PE foil.
- Wooden structure of the C24 timber floor frame.
- Thermal insulation of the floor – mineral wool 20 cm.
- Steel structure of the floor frame made of closed profiles (if present).
- Protective steel mesh against rodents 6×6 mm.
- Windproof membrane.
- Concrete post for a point foundation.
- Ventilation space between the floor structure and the ground.
Ceiling structure:
- Floor finishing.
- MFP floor construction board 22 mm.
- PE foil.
- Acoustic insulation – mineral wool 120/150 mm.
- Wooden ceiling structure - C24 wood beams.
- Steel structural frame of the upper module made of closed profiles (if present).
- Steel structural frame of the lower module made of closed profiles (if present).
- Decorative beams of the ground floor ceiling made of C24 wood.
- PE foil.
- The space between modules.
- Vapor barrier foil.
- Finishing the ground floor ceiling.
Roof construction:
- Roofing.
- Wooden battens 5×5 cm.
- Counter battens 2.5×5 cm.
- Windproof membrane.
- Insulation – mineral wool (20-25 cm).
- Wooden roof structure made of C24 wood.
- Structural steel frame made of closed profiles (if present).
- OSB.
- Vapor barrier foil.
- Ceiling cladding.
Installations in the house:
Complete electrical installation 230/380 V with a fuse panel, with a set of sockets, connectors and ceiling lighting points.
Water and sewage system with power supply and sewage disposal under the floor of the house, with a water drain
Heating installation to choose from - electric radiators with programmers and thermostats, or electric underfloor heating, or central heating installation from a gas cylinder boiler or powered by an air-to-water heat pump with heat distribution by radiators or underfloor heating.
Domestic hot water, with a capacity of 50 or 80 L, or a instantaneous hot water heater in a gas furnace, or a heat pump.
Ventilation: in houses in the summer variant, exhaust ventilation with ventilation grilles + window air vents in the windows, in all-year-round houses, we suggest the use of mechanical ventilation with recuperation: with a central recuperator, or alternatively, wall recuperators.
Air conditioning: we offer a split air conditioning installation with an indoor unit in the living room.
Elements of a smart house: we can additionally offer an alarm installation, and management of heating, hot water and mechanical ventilation from the position of the application on a mobile phone.
A detailed description of the finish and additional equipment of our module houses - click here
Plans of the MG 3 modular house
The interior of the MG 3 modular house in the basic variant consists of: on the ground floor - a living room, a kitchenette, a bathroom and a utility room, and in the attic - three bedrooms. The base version of the house has a small usable area. Individual rooms are not large, but they have been designed and furnished in a functional and ergonomic way. We get inside the house through a wide door in the side elevation under a small roof, straight to the living space of the ground floor. On the sides there is a wardrobe, a cabinet for shoes and hangers.
Next we go to the living room, with a large glazed opening to the terrace, with the width of the entire gable wall. The living room has a seating area with a corner sofa and a fireplace wall, beautifully exposed stairs to the attic, and a dining area with a table and chairs. On the other side of the house we have an L-shaped kitchen with upper and lower cupboards, a built-in fridge, a hob and a sink, a comfortable bathroom with a shower cabin and fittings for a washing machine and boiler, and a practical utility room - storage under the stairs. The glazing in the living room brings a lot of light into the interior and optically enlarges the living room. In the attic there are three sleeping rooms - a master bedroom and two additional (children's) rooms. Each of the rooms has a built-in wardrobe and a full-size bed. The house is designed for a family of 4, but it can also be a house for 2 people. Using a sofa bed in the living room on the ground floor, it can accommodate up to 6 people at a time. The remaining 16 variant versions of the MG 3 modular house have increased external dimensions and usable areas - from the basic 38.5 m2, up to 71.8 m2 of usable space in the largest variant of the house. The area of a house with an attic floor with slants is always larger by an additional 10-15 m2. Variant projections of the MG 3 house are shown below.
Photo gallery of modular houses
Variants of equipment of mobile houses
Our module houses are available in three finishing standards::
Basic - a basic variant of a finished house, with a set of installations, but without furniture.
Comfort - a finished variant with a bathroom and kitchen, with kitchen furniture, bathroom furniture, sanitary utensils, household appliances, but without furniture in the rooms.
Premium - fully finished and equipped with a set of furniture and appliances throughout the house in all rooms.
In addition, you have the option of extensive personalization from the elements of additional house furnishings.
A detailed description of the finish and additional equipment of our module houses - click here
Thanks to the long list of accessories for our mobile houses, you can invent and design your house by choosing colors, materials and solutions according to your needs and taste. The process of configuring and personalizing the house is a very simple and pleasant experience, and its effect is a house made to measure in accordance with the wishes and vision of the client. At every step, our designers and traders provide advice, assistance and professional advice.
basic
Basic standard of finishing and furnishing of the house:
Steel and wooden structure of the house: welded and hot-dip galvanized steel floor frame + steel structure elements; wooden frame structure of the floor, walls and roof made of dried Swedish C24 timber
Anti-moisture insulation, vapor barrier and windproof insulation in the floor, walls and roof
The bottom of the house is secured with a 6mm steel mesh + a membrane that allows the floor to breathe
Thermal insulation: 20 cm of mineral wool in the floor and 20/25 cm in the roof
Thermal insulation 20 cm of mineral wool in external walls
Roof covering made of metal tiles or seam sheets (depending on the house model), flashings made of coated sheets, PVC gutters and downpipes
Double-glazed PVC windows (optionally triple-glazed), with 6-chamber frames, with vents ensuring air circulation inside
Patio doors with a movable post
External PVC glazed doors with a double lock or insulated steel doors with a double lock
External finish of window and door glyphs made of processing sheet
Internal finishing of windows and doors with wooden or varnished MDF strips
Mdf interior doors in veneer with an adjustable door frame
Floor finished with MDF floor panels (vinyl panels optional)
PVC skirting boards
Ceiling strips made of lacquered MDF or wood
Finishing the interior walls and ceilings of the house with wooden cladding made of boards and/or Strama/Forestia panels, finishing the bathroom walls with Fibo panels/wooden boards
Finishing the external facade with painted wooden cladding or vertical duo rhombus boards (optionally Vinylit panel, Cedral panel, sheet metal)
Complete installation of water and sewage, electricity, rtv/internet, ventilation
Complete equipment with contacts, sockets, connectors
Preparation of electrics for the installation of electric radiators and an electric boiler
Compact toilet bowl (optionally wall-hung – Geberit), shower tray, connections for sanitary ware and fittings
Fuse switchboard
External installation entrances for water, sewage and electrical power to the house under the floor, with preparation for seasonal water drainage
Mechanical ventilation in the bathroom and kitchen - wires and electrical installation
Internal LED lighting
Outputs for external lighting (for wall lamps)
Rtv antenna cable outside the house
comfort
Standard Basic and additionally:
Shower cabin – dimensions depending on the house model
Bathroom washbasin with a battery and a lower washbasin cabinet, a mirror and LED backlight
Exhaust bathroom fan
50 L electric boiler in a built-in cabinet (optional 80/100 L)
Electric towel rail bathroom radiator/dryer
Panel electric heaters in each room
Lower kitchen cabinets in standard veneer with a top
Upper kitchen cabinets in standard veneer
Kitchen sink with faucet
Built-in under-counter fridge with freezer compartment
Two-burner electric hob
Kitchen hood built into the upper cabinets
premium
Standard Comfort and additionally:
Dining table with chairs
TV cabinet in the living room
Bed in the master bedroom with a mattress and a bedding box
Beds in a children's bedroom with mattresses
A wardrobe in the master bedroom
A wardrobe in a children's bedroom
Bedside tables and tables in bedrooms (according to the equipment of the specific model)
Wall cabinets in the bedrooms above the beds (according to the model of the house)
developer
Our modular houses can also be ordered in the developer's standard, i.e. for self-finishing
Steel and wooden house structure, consisting of 2 or 4 modules connected together with screwed connections
Hot-dip galvanized steel floor frame + steel structural elements, floor, wall and roof structure made of dried Swedish C24 wood, manufactured using frame house technology
Floors made of double MFP boards 22+15 mm with overlap
Anti-moisture insulation, vapor barrier and windproof insulation in the floor, walls and roof
The bottom of the house is secured with a 6mm steel mesh + a membrane that allows the floor to breathe
Thermal insulation: 20 cm of mineral wool in the floor and 20/25 cm in the roof
Thermal insulation 20 cm of mineral wool in external walls
Roof covering made of sheet metal or metal tiles (depending on the type of house), flashings made of coated sheet metal, gutters and downpipes made of PVC
Double-glazed PVC windows (optionally triple-glazed) with 6-chamber frames and vents ensuring air circulation inside
Patio doors with a movable post
External PVC glazed doors with a double lock or insulated steel doors with a double lock
External finish of window and door glyphs made of processing sheet
Finishing the external facade with a horizontal wooden facade board or a vertical duo rhombus board (optionally Vinylit panel, Cedral panel, sheet metal)
Finishing of interior walls and ceilings (depending on the house model): wooden boards, or plasterboards or fermacell without filling, or OSB boards
Complete water and sewage, electrical, TV/Internet and ventilation installation
Preparation of electrics for the installation of electric radiators and an electric boiler
Fuse switchboard
External installation entrances for water, sewage and electrical power to the house under the floor, with preparation for seasonal water drainage
Mechanical ventilation in the bathroom and kitchen - wires and electrical installation
Outputs for external lighting
Rtv antenna cable outside the house
ADDITIONAL EQUIPMENT
Changing the facade to thermory wood, vinylit panels, cedar panels
Replacement of interior wall cladding with Strama and Fibo
Changing the floor to vinyl or wood panels (layered board)
Change to triple glazed windows.
Changing the heating system from electric radiators to infrared floor foil
Changing the heating system to a gas boiler and water heaters, or to a heat pump and heaters
Fireplace with a double-walled steel Poujoulat chimney
Upgrade of kitchen/bathroom equipment: dishwasher, larger fridge, oven, larger induction hob, washing machine
Curtain rods, curtains, pleated blinds, mosquito nets
Air conditioning with heating function (air-to-air heat pump)
Integrating a home with a PV installation
Mechanical ventilation with point recuperation
Corner sofa in the living room (depending on the house model)
Variants of the MG 3 modular house
We offer the MG 3 modular house in 16 variants plus the base variant. Each subsequent variant is larger - it has increased external dimensions, thanks to which we can choose houses from 38.5 m2 to 71.8 m2 of usable area, and from 45.3 m2 to 81.5 m2 of total area. The external dimensions of the houses are from the smallest house: 6.6 x 5.1 m, to the largest: 10.7 x 6.1 m.
Depending on the selected variant of the MG3 modular house, the interiors include programs with a living room, one bathroom and three bedrooms in the attic, or with a living room, two bathrooms, an additional room on the ground floor and three bedrooms in the attic. Below we present the projections and basic parameters of the variant versions of the MG 3 house. The presented versions are examples of the possibilities that can be obtained from a house of this shape and parameters. Together with you, we can design your future house completely from scratch, according to your ideas and requirements. We invite you to work together.
Modular house MG 3 variant 2
Modular house MG 3 variant 2 is a larger variant with dimensions of 8.1 x 5.1 m. A 4-module building with a living room and kitchenette and three bedrooms.
The MG 3 modular house variant 3
The MG 3 modular house variant 3, has dimensions of 9.1 x 5.1 m. In this 4-modular house, we have designed a living room with a kitchenette, three bedrooms and a large arcade.
Modular house MG 3 variant 4
Modular house MG 3 variant 4 is a 4-modular house with dimensions of 9.1 x 5.1 m. The interior has a living room with a kitchenette, four bedrooms and two bathrooms.
Modular house MG 3 variant 5
Modular house MG 3 variant 5 is a larger variant, with dimensions of 9.1 x 5.1 m. This 4-modular house has a living room with a kitchenette, four bedrooms, two bathrooms and a terrace-pergola.
The MG 3 modular house variant 6
The MG 3 modular house variant 6, is a wider variant, measuring 6.6 x 5.5 m. In this 4-modular house you will find a living room with a kitchenette and three bedrooms.
The MG 3 modular house variant 7
The MG 3 modular house variant 7 is a 4-module building with dimensions of 8.1 x 5.5 m. Inside, we designed a living room with a kitchenette and three bedrooms.
Modular house MG 3 variant 8
Modular house MG 3 variant 8 is a larger variant with dimensions of 9.1 x 5.5 m. A 4-modular house with a living room and kitchenette, as well as three bedrooms and a large arcade.
Modular house MG 3 variant 9
Modular house MG 3 variant 9 is a 4-modular house with a living room, kitchenette, four bedrooms and two bathrooms.
The MG 3 modular house variant 10
The MG 3 modular house variant 10, has dimensions of 9.1 x 5.5 m. In this 4-modular house you will find a living room, kitchenette, 4 bedrooms, two bathrooms and a terrace-pergola.
Modular house MG 3 variant 11
Modular house MG 3 variant 11 is a 4-module house with dimensions of 9.1 x 5.5 m with a living room, kitchenette, four bedrooms (they have a different layout), two bathrooms and a terrace-pergola.
The MG 3 modular house variant 12
The MG 3 modular house variant 12, has dimensions of 6.6 x 6.1 m. In this 4-module building, we have planned a living room with a kitchenette and three bedrooms.
Modular house MG 3 variant 13
Modular house MG 3 variant 13 with dimensions of 8.1 x 6.1 m. 4 modular house with a large living room, kitchenette and bedroom.
Modular house MG 3 variant 14
Modular house MG 3 variant 14 is a 4-modular house with dimensions of 9.1 x 6.1 m. A building with a living room, kitchenette, three bedrooms and a large arcade.
Modular house MG 3 variant 15
Modular house MG 3 variant 15 is a variant larger than the base model. It has dimensions of 9.1 x x6.1 m. In this 4-module house you will find a living room with a kitchenette, 4 bedrooms and two bathrooms.
Modular house MG 3 variant 16
Modular house MG 3 variant 16 is a building with dimensions of 9.1 x 6.1 m. A 4-modular house with a living room, kitchenette, four bedrooms, two bathrooms and a terrace/pergola.
The MG 3 modular house variant 17
The MG 3 modular house variant 17, has dimensions of 9.1 x 6.1 m. It is a 4-modular house in which we have designed a living room, kitchen, four bedrooms (in a different arrangement), two bathrooms and a terrace-pergola.
