Domek mobilny F
https://dreammobilhouse.pl/wp-content/uploads/domek-mobilny-model-e-1.jpg
4.7
30
5
1
Mobile house
F1
Model F1 - this is one of the largest mobile homes in our offer, which can be used as a holiday home, or a second year-round home, or even as a fully-fledged single-family home for everyday living. The bungalow has modern architecture in the style of a barn house, with a raised roof with a 35-degree pitch, a mezzanine above the ground floor and a living room with a high ceiling. A model with an attractive glazing of the gable-garden wall, opening the living room to the terrace and the garden surrounding the house. A house with an interestingly designed interior with attractive design details - an interior combining wood elements with white and graphite accessories. The house is offered in three variants and external dimensions of the house: a basic variant 13 x 4.2 m, an enlarged variant 13.5 x 4.2 m and a shorter variant 11 x 4.2 m. (...)
The Mobile house Model F1 comes in 3 functional interior variants, with different room layouts and furnishings. The exterior of the house can be adapted to the client's requirements and tastes. We can use any colour scheme, many types of wall and roof finishing materials, or a different window arrangement. The house is covered by a gable roof with a pitch angle of 35 degrees. The roof angle allows this particular model of house to be erected in areas where urban conditions dictate higher roofs and there is no permission for houses with lower roofs - as is the case with most Mobile houses.
Mobile house F1 from the outside
4+2
42-48m2
10,5/12m x 4m
Dostępnych jest wiele wariantów wnętrza i wykończenia elewacji.
The roof of the Model F1 Mobile house is finished with standing seam steel. This is the most suitable type of roofing for the style of the barn house. We can, of course, offer other roofing materials - for example, Prefa aluminium sheet with rhombus or slate shapes, or flat panel tile. The walls of the Model F1 house can be finished - depending on the customer's choice - with Vifront panels as a base, or Kerrafront or Vinylit panels. The façade can also be finished with wood natural (façade board, or rhombus board - as in the photos of the model house and in the visualisations), or the house can be finished as a mix of wood with pvc panels, or wood with sheet seam. We can also finish the whole façade including roof with seamed or paneled sheet. (...)
The colour scheme of the house finished with elevation panels can be varied at will, from the proposed base monochromatic layout of the walls and roof in shades of graphite, black and anthracite, through the light combination of panels in combination with graphite trim, or the wood and graphite colour scheme, to the grey elevation. The appearance of the exterior facades - the arrangement of windows, balcony doors and entrance doors - can also be varied according to the choice of interior variant version. The base version and variants 2 and 3 offer a large glazing of the entire gable wall with sliding doors. The Mobile house model F1 can be made on a running floor frame - with wheels, or on a lower floor frame fixed - without wheels. In both cases, we suggest that the house is founded on point foundations. In both frame versions, the house forms a compact unit and can be transported and relocated without great difficulty.
Interior of the F1 mobile house
The interior of the Model F1 house consists of a large living area - a living room, a kitchen in a ‘U’ layout and a wide corridor connecting the rooms, as well as bedrooms with a bathroom. A mezzanine was designed above the bedroom-bathroom area, accessible by ladder stairs from the corridor. The mezzanine overlooks the high space of the living room and merges with it into one large volume. The functional programme of the house provides comfortable living for a family of four, regardless of the purpose of the cottage - for summer purposes or as a year-round dwelling. Really high open ceilings to the roof ridge, and large glazings opening up the interior to the surrounding garden, add to the spaciousness and create an amazing atmosphere. (...)
The interior of the house in each available furnishing option is completely finished, with wall, ceiling and floor finishes. The interior walls of the cottage are finished with pvc or Strama panels, or, as an option, partially with Fibo panels. For those who like rustic interiors, we offer finishing parts of the walls with natural wood. The ceilings are lined with Strama boards, or optionally with natural wood. The floors of the Model F1 house are finished with Lentex pvc object flooring with high abrasion resistance. We can also offer vinyl laminate flooring, or as a variant, laminate flooring. In the Premium equipment version, the cottage is completely furnished - we make the furniture ourselves, especially for this project, in our carpentry workshop. Furniture made of wood-like laminated panels, or without wood texture - in the colour of your choice. Household appliances, sanitary ware and upholstered furniture are possible parts of the furnishings - depending on the specification chosen.
A detailed description of the finish and additional equipment of our mobile houses - click here
Virtual tour around the house
Parameters of the mobile house F1
Dom Model F1 występuje w trzech rozmiarach bryły o wymiarach: podstawowym 13 x 4,2 m, oraz powiększonym 13,5 x 4,2 m i krótszym wariancie 11 x 4,2 m. Każdy z wariantów : 1,2,3 – ma trochę inaczej rozplanowane funkcjonalnie wnętrza (patrz niżej –F1 ). Konstrukcja domu składa się z dolnej ramy podłogowej stalowej – malowanej lub cynkowanej, zależnie od wybranej specyfikacji. Pozostałe elementy konstrukcji domu: strop podłogi domu, ściany, oraz dach – wykonane są w szkielecie drewnianym z certyfikowanego drewna C24. (…)
The floor, walls and roof are insulated: thermally, damp-proof and wind-proof with mineral wool, vapour-proof films and membranes. The partitions ensure diffusion openness, high tightness and very good vapour control. Depending on which variant of the house is chosen - summer or year-round - the thickness of the thermal insulation varies. Insulation in external walls is 10 or 20 cm of wool, floor insulation - 15 or 20 cm, ceilings - 15, 20,25 cm. Floor finish - 38 mm construction boards and final flooring. Finishing of walls and ceilings on the inside: pvc panels or Strama or Fibo, natural wood (boards). Finishing of walls on the outside: Vox Vifront or Kerrafront wall panels, Vinylit panels, or variant natural wood (facade board, or rhombus board). The house can also be finished with full sheet metal seam (walls and roof in one material), or panelled sheet metal, or the façade can be made as a mix combining wood and sheet metal. Roofing: seamed metal sheet or panel tile in a colour of the client's choice. Exterior window and door frames: pvc double-glazed or triple-glazed windows - depending on the purpose of the cottage. External doors: pvc glazed or solid steel doors. Interior doors: Dre panelled, or on request varnished anti-moisture panelled.
| External dimensions | 13,0 x 4,2 m |
| Building area | 54,6 m2 |
| Total area | 54,6 m2 |
| Usable area | 43,34 m2 + mezzanine |
| Gross volume | 194 m3 |
| Net volume | 123 m3 |
| Number of people / beds | 4 + 2 |
| The height from the floor to the ridge | 4,01 m |
| Ridge height with frame without wheels | 4,58 m |
| Ridge height with frame on wheels | 4,88 m |
| Room height | 2,3 – 3,48 m |
| The angle of the roof | 35 degrees |
| The weight of the house | 15-19 tonnes |
| House structure | Steel and wood |
| Minimum number of support points for a point foundation | 10 |
| Energy performance for year-round version | EP 69 kWh/(m2) |
Wall construction:
- Wall cladding.
- Vapor barrier foil.
- Insulation – mineral wool.
- Structural posts of the wooden frame of external walls - C24 wood.
- Windproof membrane.
- Wooden battens 5×5 cm.
- Ventilation space.
- Facade cladding.
Wall construction:
- Wall cladding.
- Vapor barrier foil.
- Insulation – mineral wool.
- Structural posts of the wooden frame of external walls - C24 wood.
- Windproof membrane.
- Wooden battens 5×5 cm.
- Ventilation space.
- Facade cladding.
Floor construction:
- Floor finishing.
- MFP floor construction board 22 mm.
- PE foil.
- Insulation – mineral wool.
- Wooden structure.
- Steel mesh 6×6 mm against rodents.
- Windproof membrane.
- Steel frame construction.
Roof construction:
- Roofing.
- Wooden battens 5×5 cm.
- Counter battens 2.5×5 cm.
- Windproof membrane.
- Insulation – mineral wool.
- Roof structural beams – C24 wood.
- Vapor barrier foil.
- Ceiling cladding.
Installations in the house:
Complete electrical installation 230/380 V with a fuse panel, with a set of sockets, connectors and ceiling lighting points.
Water and sewage system with power supply and sewage disposal under the floor of the house, with a water drain
Heating installation to choose from - electric radiators with programmers and thermostats, or electric underfloor heating, or central heating installation from a gas cylinder boiler or powered by an air-to-water heat pump with heat distribution by radiators or underfloor heating.
Domestic hot water, with a capacity of 50 or 80 L, or a instantaneous hot water heater in a gas furnace, or a heat pump.
Ventilation: in houses in the summer variant, exhaust ventilation with ventilation grilles + window air vents in the windows, in all-year-round houses, we suggest the use of mechanical ventilation with recuperation: with a central recuperator, or alternatively, wall recuperators.
Air conditioning: we offer a split air conditioning installation with an indoor unit in the living room.
Elements of a smart house: we can additionally offer an alarm installation, and management of heating, hot water and mechanical ventilation from the position of the application on a mobile phone.
A detailed description of the finish and additional equipment of our mobile houses - click here
Plans of the mobile house F1
The interior of the house is divided into a living area - with a living room connected to a U-shaped kitchenette and a wide corridor, and a bedroom area - with a bathroom and two or three bedrooms - depending on the interior version. We access the interior through the front door in the central hallway of the house, from which we can go to the individual rooms. Opposite the entrance we have a clothes closet. To the right we go to the living room area and to the left through the corridor to the bedroom and bathroom. From the hallway we also access the mezzanine via ladder steps.
The living room with kitchenette impresses with its space, raised ceiling height and a beautiful wide glass wall with sliding doors, opening the interior to the terrace and garden. In the living room, a sofa corner, a TV wall and a comfortable dining table with chairs have found their place. The interior ceiling is very high with a 35-degree slope, opening up to the ridge, which enhances the feeling of spaciousness of the house. The living room is spatially connected to the antresolve - separated by an openwork balustrade. The master bedroom houses a full-size double bed with storage, with cupboards and a wide gable window, as well as a wall of wardrobes and a dressing table with mirror. The children's bedroom houses two full-size beds, a wardrobe, wall units and a mini-office. The bathroom comfortably accommodates a corner shower cubicle, suspended toilet bowl, cupboard with sink and mirror, ladder radiator, wall cabinets and space for a washing machine. The hot water boiler has been cleverly concealed in the built-in furniture. In addition to the base version of the house, we have designed for model F1 - additional 2 variant versions functional interiors - variant projections are shown below.
| Usable area | 43,34 m2 + mezzanine |
| Total area | 54,6 m2 |
| Building area | 54,6 m2 |
Mobile house F3 gallery
Variants of equipment of mobile houses
Our houses are available in three finishing standards:
Basic - a basic variant of a finished house, with a set of installations, but without furniture.
Comfort - a finished variant with a bathroom and kitchen, with kitchen furniture, bathroom furniture, sanitary utensils, household appliances, but without furniture in the rooms.
Premium - fully finished and equipped with a set of furniture and appliances throughout the house in all rooms.
In addition, you have the option of extensive personalization from the elements of additional house furnishings.
A detailed description of the finish and additional equipment of our mobile houses - click here
Thanks to the long list of accessories for our mobile houses, you can invent and design your house by choosing colors, materials and solutions according to your needs and taste. The process of configuring and personalizing the house is a very simple and pleasant experience, and its effect is a house made to measure in accordance with the wishes and vision of the client. At every step, our designers and traders provide advice, assistance and professional advice.
basic
Basic standard of finishing and furnishing of the house:
Steel and wooden structure of the house; welded steel floor frame, hot-dip galvanized, floor, walls and roof structure made of dried Swedish C24 wood
Floor made of double MFP board 22+15 mm with overlap and tongue-and-groove
Axle(s) and wheels for transport
Anti-moisture insulation, vapor barrier and windproof insulation in the floor, walls and roof
The bottom of the house is secured with a 6mm steel mesh + a membrane that allows the floor to breathe
Thermal insulation: summer variant – 15 cm of mineral wool in the floor and roof, 10 cm of mineral wool in the walls; all-year variant – 20 cm of mineral wool in the floor, 20/25 cm in the roof, 20 cm of mineral wool in the walls
Roof covering made of metal tiles or seam sheets (depending on the house model), flashings made of coated sheets, PVC gutters and downpipes
Double-glazed PVC windows (optionally triple-glazed), with 6-chamber frames, with vents ensuring air circulation inside
Patio doors with a movable post
External PVC glazed doors with a double lock or insulated steel doors with a double lock
External finish of window and door glyphs made of processing sheet
Mdf interior doors in veneer with an adjustable door frame
Floor finished with highly abrasion-resistant vinyl flooring – commercial grade (vinyl panels optional)
PVC skirting boards
Ceiling strips made of lacquered MDF or wood
Finishing the interior walls of the house with PVC panels (optionally Strama / Forestia)
Finishing the external facade with Vox Vifront siding (optionally Vinylit, Vox Kerafront, Cedral panels, wooden facade, sheet metal)
Complete installation of water and sewage, electricity, rtv/internet, ventilation
Complete equipment with contacts, sockets, connectors
Preparation of electrics for the installation of electric radiators and an electric boiler
Compact toilet bowl (optionally wall-hung – Geberit), shower tray, connections for sanitary ware and fittings
Fuse switchboard
External installation entries for water, sewage and electricity supply to the house, with preparation for draining the water
Ventilation in the bathroom and kitchen - wires and electrical installation
Internal LED lighting
Outputs for external lighting (for wall lamps)
Rtv antenna cable outside the house
Preparation for connecting the anti-freeze cable for the water supply line
comfort
Standard Basic and additionally:
Shower cabin – dimensions depending on the house model
Bathroom washbasin with a battery and a lower washbasin cabinet, a mirror and LED backlight
Exhaust bathroom fan
50 L electric boiler in a built-in cabinet (optional 80/100 L)
Electric towel rail bathroom radiator/dryer
Panel electric heaters in each room
Lower kitchen cabinets in standard veneer with a top
Upper kitchen cabinets in standard veneer
Kitchen sink with faucet
Built-in under-counter fridge with freezer compartment
Two-burner electric hob
Kitchen hood built into the upper cabinets
premium
Standard Comfort and additionally:
Dining table with chairs
TV cabinet in the living room
Bed in the master bedroom with a mattress and a bedding box
Beds in a children's bedroom with mattresses
A wardrobe in the master bedroom
A wardrobe in a children's bedroom
Bedside tables and tables in bedrooms (according to the house model)
Wall cabinets in the bedrooms above the beds (according to the model of the house)
ADDITIONAL EQUIPMENT
Changing the basic summer variant to a year-round version (thicker insulation)
Changing the facade to vinylit panels, cedar panels, sheet metal
Replacement of interior wall cladding with Strama and Fibo
Changing the floor to vinyl or wood panels (layered board)
Change to triple glazed windows.
Changing the heating system from electric radiators to infrared floor foil
Fireplace with a double-walled steel Poujoulat chimney
Upgrade of kitchen/bathroom equipment: dishwasher, larger fridge, oven, larger induction hob, washing machine
Curtain rods, curtains, pleated blinds, mosquito nets
Air conditioning with heating function (air-to-air heat pump)
Integrating a home with a PV installation
Mechanical ventilation with point recuperation
Corner sofa in the living room (depending on the house model)
Mobile house variants F1
In our offer we have prepared 3 versions of the interior space in Mobile house F1..
Below are the other variants in addition to the basic interior layout. Version 1 measures 13 x 4.2 m, the shortened / reduced version 2 measures 11 x 4.2 m., and the enlarged ( extended ) version 3 measures 13.5 x 4.2 m.
Mobile house F1 variant 2
Mobile house F1 variant 2
| Usable area | 37.38 m2 + mezzanine |
| Total area | 46,2 m2 + mezzanine |
| Building area | 46,2 m2 |
Mobile house F1 variant 3
Mobile house F1 variant 3
| Usable area | 44,93 m2 + mezzanine |
| Total area | 56,7 m2 + mezzanine |
| Building area | 56,7 m2 |